一、 购置矿机和电源
I. Acquisition of mine machines and power sources
第一步，买矿机，市面上矿机种类很多，可以看我之前的文章，有介绍！
The first step is to buy a miner. There are many types of miner on the market.
二、 注册钱包（如已注册则跳过此步骤）
II. Registered wallet (exceeding this step if registered)
钱包暂时分着三种，网页钱包(又称为在线钱包)， 移动端钱包，硬件钱包。注册的话不懂的可以问我！
The wallet is divided into three types, the web wallet (also known as the online wallet), the mobile end wallet, and the hardware wallet.
三、 注册矿池（如已注册则跳过此步骤）
III. Registered ponds (exceeding this step if registered)
目前比较活跃的有鱼池https://www.f2pool.com/，
The most active fish ponds are https://www.f2pool.com/.
鱼池支持BTC、LTC、ETH、ETC、ZEC五种币的挖矿。BTC和LTC挖矿需要先注册鱼池账户，填写钱包地址；ETH、ETC、ZEC挖矿免注册，只需在挖矿软件中设置矿池、收币地址和矿工号即可。
Fish ponds support mining in five currencies: BTC, LTC, ETH, ETC, and ZEC. BTC and LTC dig first by registering fish pool accounts and filling out wallet addresses; ETH, ETC, and ZEC digs are not registered, but simply by installing a pond, a currency collection address and a miner number in the mining software.
四、 矿机接线
IV. Miner connections
蚂蚁矿机的设计非常人性化，技术小白也懂得怎么接线。
Ant miners are designed to be very human and technical whites know how to connect.
首先连接好网线，把网线插进矿机的网线接口，记得插紧一点。
First, connect to the net, plug it into the miner's network interface, and stick it tight.
然后把矿机电源的各个接口接入矿机，电源有7根接线，随便接哪个口都行，算力板和控制板都要接电源。
It then connects the various interfaces of the mine power source to the mine power source, which has seven connections, whatever the point, and the power and control panels are connected to the power source.
像这样就是把所有的电源线接口全都接好了，接好线之后记得检查一下有没有插得不够深的地方。
It's all connected to all the power lines like this, and then check if there's anything deep enough.
接完所有的线就可以让电源通电了，这时候矿机的灯会开始亮，机器开始响。
Once all the wires are connected, the power will be turned on, and the lights on the mine will be activated and the machine will be ringing.
五：下载软件（如已下载则跳过此步骤）
V: Downloading software (jumping this step if downloaded)
点击这个网页，下载蚂蚁矿机官方提供的找矿机IP的软件，这是软件用来识别矿机IP的。https://bitmain.kf5.com/hc/kb/article/1071935/
Click on this web page to download the official ants miner IP, which is used to identify miner IP. https://bitmain.kf5.com/hc/kb/article/1071935
解压下载到的文件，打开IPReporter这个程序。点击“Start”，然后按住矿机的IPReporter这个按钮，按一秒之后松开。
Unpresses the downloaded file and opens the IPReporter program. Click & ldquao;Start&rdquao; and then press the IPReporter button of the mine machine and release it after a second.
此时软件上会自动弹出这台矿机的IP地址，将IP地址复制到浏览器中
This will automatically eject the IP address of the mine and copy the IP address to the browser.
六、连接矿池
VI. LINKS TO MINES
这个时候我们就进入管理矿机的后台啦，在miner configuration这里，把矿池的挖矿服务地址复制过来，只复制//后面的内容即可。总共有三个地址，全部都要复制到矿机后台。
At this point, we're going to go to the backstage of the mine management machine, and we're going to copy the mining service address of the pond, and we're just going to copy the contents. There's three addresses, all to the back of the mine.
Worker（也就是矿工的意思）这一栏填上自己蚂蚁矿池的刚刚创建的矿工名就行，三个都填一样的，密码自己设置即可。点击右下角的Save&Apply，等待设置完成即可。
Worker (i.e. miners) fills in the newly created miner's name in its own ant pool, all three of which are the same. The password is set by itself. Click on Save&Apply at the lower right corner, and wait until the setup is complete.
这个时候进入Miner Status，多刷新几次，就可以出现蚂蚁矿机目前的运行情况啦！
It's time to go into Miner Status, refresh it a few more times, and we'll see how the ant miner is currently operating!
以上就是使用蚂蚁矿机挖矿的所有详细步骤！ 按着教程一步一步来，你也可以挖到属于自己的比特币
You can dig up your own bitcoin one step at a time.
注册有任何问题请添加 微信：MVIP619 拉你进入群
打开微信扫一扫
添加客服
进入交流群
发表评论